2005

March

Honolulu Woodturners

A Chapter of the

American Association of Woodturners

Minutes of March 8, 2005

 

President Ed Potter opened the meeting by reminding folks they need to get their dues up to date. Annual membership fees are $25. For those in arrears, please send a check, payable to Honolulu Woodturners to:

 

 

 

 

 

 

Ed mentioned the club has been offered the opportunity to harvest some wood from trees that are being removed from Schofield Barracks. This is likely to be mid April. We will need manpower and trucks. The wood would be available to all members. However, those helping with the harvest would have first choice. More information will be sent as it becomes available.

 

Woodcraft, under the direction of Leroy, has offered the club space at the wood show being held at Neal Blaisdale Center. Ed mentioned that we could possibly do demonstrations or show off our work.

 

We are sorry to hear about the health complications of Lee (Hartley) Cole. He will be undergoing chemotherapy and we wish him the best. Lee may be contacted at honolulu@honoluluwoodturners.org Lee had been doing the video taping of our meetings and demonstrations. Until he is back on his feet, we need a volunteer to take over the video camera.

 

Andy Cole mentioned there is someone interested in having rings and bracelets turned. The pieces will be inlayed with jade and wholesaled to stores on the mainland. They are looking for 12 each in ebony, zebra wood, padauk and bacote. If interested, call Nicholai at

377-2333 or 228-2732.

 

Ed Potter mentioned Sharon Doughtie has been in contact with Laurie Baron of Nohea Gallery about our club entering pieces in a wood turning show to benefit Aloha United Way. The show will likely be sometime in June. It is a way to showcase the woodturning community's work and for us to make some sales. Laurie is planning to donate 15 percent of her portion of the sale to the Aloha United Way. The pieces will go to Nohea Gallery on consignment. What is not sold by the show's end may be left there for sale or picked up. The club participated in the show last year. If you've never sold anything through Nohea before, here's your chance. Shows are a good way to get your work out there for the public to see and buy. More information will be sent out as it becomes available and there is sufficient interest.

 

We had three visitors to the meeting. Andy Cole brought his mother and two new turners made their first visit; Cory Kimura and Dean Mailheau.

 

Several business opportunities were presented:

 

Someone needs a koa urn. They need it by this coming Saturday. If interested, contact Ed Potter at ed_potter@honoluluwoodturners.org

 

David Higa has been approached by several folks wanting something turned. For more information contact David at david_higa@honoluluwoodturners.org

 

Larry Day has a couple of pieces of machinery for sale. Both have low usage and are in great shape. Prices are negotiable. 

             -- Jet Mini Lathe with stand (includes some additional aftermarket tool rests)

             -- Delta Shopmaster 12 inch bandsaw with stand

Contact Larry at 722-3198 or 676-4744 or honolulu@honoluluwoodturners.org

 

Stewart Chow gave an update on his efforts to secure outside demonstrators for the club. He has been in contact with Trent Bosch and Betty Scarpino. Trent is tentatively scheduled for May 28 and 29. Trent's website is www.trentbosch.com Betty is tentatively scheduled for November 4 and 5. Betty's website is www.bettyscarpino.com

 

Available for sale at the meeting were T-shirts and caps embroidered with the club logo. They sell for $12.50 each. Contact Andy Cole at 739-1050 or andy_cole@honoluluwoodturners.org to check on availability, reserve, or purchase any of them.

 

Robert Hamada is a master woodturner living on Kauai. Mr. Hamada has a limited edition DVD or a 60-page color retrospective of his career works for sale. On Oahu, call 285-2262 for prices or more information.

 

Cathy Berenberg has a website up and running. It is an interesting and well done site. The address is www.marymckeecustomlamps.com

 

We received a 'Call for Artists' e-mail from Nancy Rodda who is a corporate concierge at Pacific Guardian Center (PGC). Late last year Nancy organized PGC's first More Arts than Crafts Exhibition. She is looking for high quality turners who are interested in participating in the spring show in late April or early May. Last year's artists gained significant exposure and sales. This is an excellent opportunity as no up-front fees are charged. The fee is 10% of your sales. Last year Cathy Berenberg participated and said 'It is a great location and a high end crowd. There is wonderful ambience in that courtyard setting.'  She did well and has already sent in her application to participate again this time. For more information contact Nancy at 523-5549 or nrodda@lesconcierges.com

 

The program this meeting was in two parts.

 

Aaron Hammer, a protégé of Jerry Kermode's, gave us a talk about different venues available to sell our work and his experiences in marketing his work.

 

The organizations he talked about and their websites are:

Sandy Rhines, Treasurer

Honolulu Woodturners 

611 North Kainalu Dr.

Kailua, Hawaii

96734

Pacific Handcrafters Guild

Hawaii Craftsmen

Handcrafters and Artisans Alliance

The Arts at Marks Garage

Island Craft Bulletin

Aaron said it takes a while to become established and to 'stick with it'. Aaron uses an agent or sales rep to market his work. He feels his turning time is worth more than the percentage he pays the agent.

 

Aaron then fielded questions from various members. Following the 'question and answer' portion, he presented a slide show of some of his work.

 

Aaron offered to open up his shop Saturday, April 16 from 11 a.m. to 4 p.m. He invited anyone who is interested to come to his place in Hauula across from Pounders Beach. Call Aaron at 293-8284 for directions.

 

Aaron also generously brought in a bunch of milo logs to share.

 

The second part of the program consisted of Ed Potter demonstrating one way to turn a sphere. His method is based on Christian Burchard's techniques. Ed then shared some solid and hollowed spheres he had created. Some were embellished with texturing or carving and one featured some off-set turning.

 

Ed Potter donated a box of burl turning blocks to the club. Challenge Chair Craig Mason offered a piece of the burl to any member who had never entered one of the challenges.

 

In an attempt to encourage more participation, multiple prizes are being awarded at the meeting. Each meeting a participation prize winner will be drawn from the people who enter a piece in either of the challenges or in the instant gallery. Prizes will also be awarded to the top winners in the challenges.

 

The prizes this month were a club shirt or hat; $15 gift certificate; or a piece of burl, koa, kou, or milo wood.

 

Charles Gerdes was the lucky winner of the participation prize.

 

The March challenge was either an egg shape or a hollow form. Members are encouraged to enter both categories.

The challenge for May will again have two categories. You are encouraged to enter both. One category is to turn a sphere and the other is to turn a natural edge piece.

 

Craig gave a tentative challenge schedule:

Hollow form:

             1st place

             2nd place

             3rd place

 

             Honorable Mention:

 

Craig Mason

Tom Young

Larry Rodrigues

 

Doug Bowers Andy Cole

Nelson Lindsay

Ed Chun

Raleigh Ferdun

 

acacia piece with voids on two sides

myrtle burl with natural edge

narra jar with finial

 

kiawe hollow form

Norfolk pine hollow form

spalted mango hollow form

hau hollow form

lychee hollow form

Egg form:

             1st place

 

 

             2nd place

 

             3rd place

 

 

             Honorable Mention:

 

Andy Cole

 

 

Craig Mason

 

David Higa

 

 

Charles Gerdes

Nelson Lindsay

David Chung

Rob Hale

Tom Young

Jim Orrick

Doug Bowers

 

Sunny Side Up egg with osage orange              yolk and maple white on a              walnut plate

Hatching Sea Turtle, egg with texturing              and carving

Hawaiian Easter Basket -- bowl with 12              eggs of   different wood

 

egg light

egg

segmented egg

oak egg

koa egg

false koa egg

koa egg

Instant Gallery:

             Jon Tuthill

 

             Larry Rodrigues

             Tom Young

 

 

             Andy Cole

 

an ebonized monkey pod vessel. He used steel wool and              vinegar to create the ebonizing solution

a lidded rose myrtle piece with a finial

pieces with various embellishments. A maple bowl with              burning, a koa bowl with a dyed bamboo design              and a hau piece.

two natural edge pieces; one of lychee and the other of              cinnamon

The May meeting is scheduled for Tuesday, May 10, 6:00 p.m., at the Woodcraft warehouse. The meetings are the second Tuesday of the odd months.

 

Submitted by Tom Young

July

September

November

-- burl and furniture

-- confetti lamp and carved turning

-- wine stopper and segmented or staved turning

Craig Mason

Andy Cole